Mechanical Engineering is a field that requires both a strong academic foundation in essential concepts as well as continued development of professional practice. Universities and academic institutions around the world offer courses in Mechanical Engineering, which focus on the most up-to-date techniques, practices, concepts and equipment in a range of areas relevant to mechanical engineering. Many mechanical engineering courses culminate with a diploma or professional certification, while others offer academic credit toward a Bachelor, Master of PhD program in Mechanical Engineering.
Mechanical engineering courses are offered on a full time or part time basis. This variety enables universities to provide for all kinds of students with a variety of academic needs. Mechanical engineering courses often specialize in one area of the field, requiring students to attend lectures and seminars and often complete projects or lab work to test their understanding of essential concepts.
Since each program is different, it may be useful to use the web form on the information page of a mechanical engineering course that interests you, to contact the university directly and request more information. If you are ready to take the next step toward building your professional qualifications in Mechanical Engineering, then scroll down and click to read more, today!
Learn how to apply cutting-edge knowledge of aeroacoustics in a simple and effective way. After taking this course you will be able to reliably measure noise in a variety
Learn how to apply cutting-edge knowledge of aeroacoustics in a simple and effective way. After taking this course you will be able to reliably measure noise in a variety of mechanical systems and develop noise reduction strategies to improve their aerodynamic design and performance.
Over the last few years, the field of aeroacoustics has developed rapidly in finding solutions for reducing noise from aircraft, engines, ventilation systems and wind turbines. However, finding the right balance between achieving maximum performance (of mechanical systems such as airplanes, cars, drones, etc.) and lowering their noise output to comply with noise regulations, and ensure people's comfort and health, is a complicated task....
The International Institute Of Plant Engineering And Design
The flexibility analysis of piping systems is carried out by skilled persons within engineering companies. The course is created and conducted by qualified professional e
The flexibility analysis of piping systems is carried out by skilled persons within engineering companies. The course is created and conducted by qualified professional engineers and is based on years of experience. The purpose of this course is to train flexibility analysis, to engineers with some years of experience in the piping discipline.
This course consists of some study material in pdf, multiple-choice tests and case studies. The course emphasis is laid on the solution of practical designs and calculations with the help of the tutor. The participant receives feedback from the instructor via the discussion forum and web conferences.
What you'll learn
Week 1: Introduction to flexibility analysis
Week 2: Pipe stress classification. Failure theory. Admissible stress
Week 3: Stress intensification coefficients
Week 4: Basic piping support elements
Week 5: Thermal expansion. Analysis of sustained case
Week 6: Analysis of operation case: pipe racks
Week 7: Analysis of operation case: static equipment
Week 8: Analysis of operation case: piping
Week 9: Analysis of flange leakage
Week 10: Analysis of occasional loads: wind and earthquake
Week 11: Introduction to dynamic analysis. Other pipe supports.
Week 12: Final project
A thorough working knowledge of Ableton Live is essential if you're planning to be an electronic musician or club DJ. With its combination of powerful on-board virtual in
TRAINING IN ABLETON LIVE: AVAILABLE IN ALL 50 STATES AND CANADA.
Since 1989, the Recording Connection has placed more than 11,000 students as working apprentices (externs) in actual recording studios throughout the United States, as well as in Canada, Australia and the U.K. Our students are mentored by professional audio engineers and music producers, including many who have worked on Grammy-winning, Platinum-selling projects by some of the biggest names in the business. Every Recording Connection mentor is screened carefully to make sure they have the proven experience and knowledge to to help our students get their careers off the ground.
About our Ableton Live Course Curriculum
A thorough working knowledge of Ableton Live is essential if you're planning to be an electronic musician or club DJ. With its combination of powerful on-board virtual instruments, powerful arrangement tools and live-performance capabilities, Ableton is uniquely suited to the needs of today's electronic musician. When used with the right controller, Ableton is capable of being the only instrument you need for designing, recording and performing your mixes. As a digital audio workstation (DAW), Ableton Live functions much like the others, offering you the ability to record, mix and master your tracks in a virtual production environment with industry standard audio and MIDI processing. But unlike other DAWs, Ableton also provides a powerful, massive sound and loop library, along with a set of amazing features that enable you to mix, edit and beat match in real time. With up to 4000 loops, nearly 400...
USA, Los Angeles, United Kingdom, Birmingham, Brighton, Bristol, Cambridge, Cheltenham, Exeter, Ipswich, Leeds, Leicester, Liverpool, London, Manchester, Newcastle upon Tyne, Northampton, Norwich, Nottingham, Oxford, Plymouth, Sheffield, Stoke-on-Trent, Aberdeen, Dundee, Edinburgh, Glasgow, Belfast, Londonderry, Cardiff, Swansea, Ireland, Cork, Bournemouth, Croydon, London Borough of Haringey, Stanmore, Worcester, York, Dublin, Australia, Canberra, Albury, Armidale, Coffs Harbour, Dubbo, Goulburn, Lismore+ 44 More
Foundation in Mechanical Engineering
Pass SPM or equivalent with minimum credits (grade C) in 5 subjects inclusive Bahasa Inggeris, Mathematics, Additional Mathematics & Physics and a pass in Chemistry; or
Pass O-Level from institution recognized by Government of Malaysia with minimum credit (grade C) in 5 subjects inclusive Bahasa Inggeris, Mathematics, Additional Mathematics/Physics and a pass in Chemistry or
Pass UEC with grade B in 5 subjects inclusive Bahasa Inggeris, Mathematics, Advance Mathematics, Physics and a pass in Chemistry; or
Other equivalent qualification recognized by Government of Malaysia
Yesterday's automobiles were simple and fun. Backyard muscle car mechanics were plentiful back then, but really well-trained professional technicians with the skills to s
Yesterday's automobiles were simple and fun. Backyard muscle car mechanics were plentiful back then, but really well-trained professional technicians with the skills to straighten out those really tough problems have always been scarce.
Today's automobiles are still fun, but they aren't simple anymore. And, while backyard mechanics are still around, they are fewer in number, and well-trained technicians are increasingly hard to find. One aftermarket service magazine puts the shortage of competent techs in the United States at more than one million, and as many as 15,000 new positions are opening yearly.
Fundamentals of Automotive Technology
Electrical and Electronic Systems
Steering and Suspension
Special Topics I and II
Motor Vehicle Air Conditioning
Drive Train and Axles
Engine Repair I and II
Advanced Automotive Engines
Engine Performance and Diagnostics
General Education Requirements
Introductory Technical English I
Introductory Mathematics I
Oral Communication Skills
Introductory Computer Skills II
The Manufacturing Engineering virtual academic program is the first virtual academic program offered in Colombia. It aims at training enterprising professionals with know
Undergraduate Course - Manufacturing Engineering
The Manufacturing Engineering virtual academic program is the first virtual academic program offered in Colombia. It aims at training enterprising professionals with knowledge in planning, managing and controlling manufacturing processes with the purpose of improving indicators of efficiency, effectiveness, and productivity in companies on a national and international basis.
The academic training areas of the Manufacturing Engineer are Materials and Manufacturing Processes, Production Systems Management, Quality Management, Industrial Safety, Environment, and Industrial Automation.
The program has an academic staff with broad academic and business experience, as well as with solid methodological training, thus making the learning process easier....
This program will teach you how to design and manufacture aircraft parts using a computer (CAD-CAM); plan the manufacturing and assembly stages of aircraft, engines and o
Best Courses in Mechanical Engineering 2019/2020. prerequisitesMath Technico-Sciences or Natural Sciences of the 5th sec. or the equivalentPhysics of the 5th sec. or the equivalentYou will learnDesign and manufacture, using a computer (CAD-CAM), aircraft parts.Plan the manufacturing and assembly stages for aircraft, engines and other components.Shaping aircraft structural elements into composite materials and sheet metal parts.Collaborate on production process planning, quality control and testing.Draw up notebooks.Your abilitiesAnalytical mindSense of planningSense of responsibilityManual dexterityUnderstanding abstract conceptsBilingualism (an asset)Your interestsNew technologiesDesign and manufacturingProblems solvingConcrete tasksStructured environmentYou can access careersMethod Officer (develops procedures for manufacturing components or assembling aircraft)Inspector and quality controllerDesigner designer of computer components, structures, systems or toolingTechnical WriterAeronautical and Aerospace Engineering TechnicianTechnician in composite materialsProgrammer of numerically controlled (CNC) machines...
The One Year Course in Car Design Tools is designed to transfer a complete understanding of automotive strategy, planning, and the relevant design techniques. The program
The One Year Course in Car Design Tools is designed to transfer a complete understanding of automotive strategy, planning, and the relevant design techniques. The programme is devised as a first approach to the most fascinating and competitive careers in the world of design. It is intended as a primer to the Master in Transportation and Car Design.
CHARACTERISTICS AND AIMS
The programme provides a tightly interlaced mix of strategic thinking, design methodology with a spur toward product and system innovation, marketing and communication insights, car design hard skills. Teaching is arranged into a balanced combination of theoretical teaching and project-based training. The One Year course is aimed at candidates with an academic background non-relevant to the main area of study wishing to acquire the essential set of skills to approach the design process. Lessons are directly relevant to the requirements and the skills needed for the Master’s year, which is a continuation of this course and focuses on more specialized aspects....
The ISAE Group Space Summer Program is organized by the four institutes of higher education: Ecole de l’Air, ESTACA, ISAE-ENSMA, ISAE-Supaero.
The Space Summer Program is
The ISAE Group is proud to present to you its Space Summer Program organized by the four institutes of high education: Ecole de L’Air, ESTACA, ISAE-ENSMA, ISAE-Supaero.
The Space Summer Program is intended for undergraduate students primarily for the ISAE Group partner universities. It will provide the students with an overall knowledge of aeronautics and space fundamentals, as viewed from a European point of view.
The contents include scientific and technical courses but also general conferences and visits to the aerospace and cultural sites.
The program is designed for junior or senior undergraduates with a strong interest in space having solid background knowledge in aeronautics and/or space sciences. A good background in general sciences is required. Graduate students can also take part in the course on a case-by-case basis....