Part time Course in Electrical Installation

See Part time Course Studies in Electrical Installation 2017

Courses are academic classes taught by qualified instructors that are intended to enhance participant’s knowledge of a given area or training in a particular discipline. Courses vary broadly in terms of length, size, content and duration.

Request Information Part time Course Studies in Electrical Installation 2017

Read More

Short Course in Management of Temporary Electrical Systems

Backstage Academy
Campus 1 day August 2017 United Kingdom Wakefield

This course is designed to give an overview into the management of temporary electrical systems for live events, based on the BS 7909 code of practice. [+]

Best Part time Course Studies in Electrical Installation 2017. The event industry has developed a wide variety of electrical distribution equipment to facilitate installation in a ‘plug and play’ fashion. Whilst these systems are highly robust, they have led to a level of complacency with regard to electrical design, which has seen an increase in the risk of electric shock and fire. In the event of such an incident, BS 7909 may well be cited in any review proceedings. This course is designed to give an overview into the management of temporary electrical systems for live events, based on the BS 7909 code of practice. Topics Covered Newly developed, accessible course. BS 7909 increasingly cited by venues as the minimum compliancy standards. Understand the statutory and non-statutory requirements. Understand the management structure, duties and responsibilities. Understand the correct audit and documentation procedures required for small and large events. Definitions, terms and principles of electrical circuits. Who Should Attend Site Electricians, Venue or Freelance Technicians, Site or Event Managers, Production or Hire Companies, H&S officers, Producers and Production Managers, Venue Owners, System Designers, Gaffers, Production or Hire companies and any others involved in the supply & installation of electrical equipment for events. Prerequisites A good background knowledge in basic electrics. If you would like a course that covers this, have a look at Working with Electricity. Included Within The Course Lunch and refreshments. [-]

Short Course: 2-Day Rigging Course

Backstage Academy
Campus 2 days August 2017 United Kingdom Wakefield

This course is an in-depth theoretical and practical training course designed for people of all levels of experience. It’s delivered using a purpose-designed truss rig and a wide range of safety equipment. It also includes one night’s on-site accommodation. [+]

This course is an in-depth theoretical and practical training course designed for people of all levels of experience. It’s delivered using a purpose-designed truss rig and a wide range of safety equipment. It also includes one night’s on-site accommodation. Topics Covered Regulations, guidance, standards, and working at height PPE inspection and Inspection records Basic lifting principles Rigging hardware – factors of safety, mode of use factors Truss theory, beams, load distributions, bridles, and angled loads Practical (Rigging hoists from bridles, floating the hoists, slinging and flying a truss-box, ropework from the flown box, de-rigging and packing away safely) Bridle choice from estimation, measurement and calculation Calculation of loads from Vector Analysis (Parallelogram of forces) Knots – Bowline and clove-hitch, and rope finishing Basket and choke techniques, shackle types Truss slinging Hoist operation and electrical safety Rescue planning Who Should Attend The course appeals to a wide cross section of people, from industry novices with an interest in rigging, to technicians working with rigging equipment, and professional riggers wanting a refresher course to sharpen their skills. Prerequisities There are no prerequisites for the Rigging Course, other than a keen interest in working in the rigging sector in live events. Icluded Within Course Lunch, refreshments and one night’s on-site accommodation *The course is delivered in a studio at Production Park subject to studio bookings and BACKSTAGE ACADEMY® reserves the right to move the location of the Rigging Course practical training to a different location on the Production Park site. [-]

Course Steamfitter/Pipefitter

Keyin College
Campus September 2017 Canada Carbonear Burin Saint John's Stephenville Grand Falls Marystown Gander + 4 more

Steamfitter/Pipefitters install and repair both high-pressure and low-pressure pipe systems used in manufacturing, the oil and gas industry, in the generation of electricity, and in the heating and cooling of buildings. [+]

Best Part time Course Studies in Electrical Installation 2017. Steamfitter/Pipefitters install and repair both high-pressure and low-pressure pipe systems used in manufacturing, the oil and gas industry, in the generation of electricity, and in the heating and cooling of buildings. The Steamfitter/Pipefitter program provides the skills and knowledge to lay, cut, assemble, install, maintain pipe systems and supports. Graduates will also be prepared to work with related hydraulic and pneumatic equipment for steam, hot water, cooling, lubricating, sprinkling, and industrial production and processing systems. This program is recognized by the Apprenticeship and Certification Board as an Interprovincial Trade (Red Seal Endorsed) which allows the holder to work in other provinces /territories without having to re-certify. Academic Admission Requirements: High school diploma or high school equivalency (Transcript and/or diploma to be forwarded to the College); or Mature students who do not meet the education prerequisites may be considered for admission on an individual basis provided the following conditions are met: Applicants are at least 19 years of age at the time of application; Applicants have been out of school for at least one year; Applicants complete the standardized assessment instrument and obtain the result of high school equivalence on all subtests; Applicants present a certified copy of grades for the highest educational level attained. [-]

Commercial Refrigeration & Air Conditioning Program (HVACR)

Bay State School Of Technology
Campus September 2017 USA Canton

Knowledge of Basic Electricity & Electronics and the fundamentals of refrigeration technology are prerequisite for the Commercial Refrigeration & Air Conditioning Program. [+]

Commercial Refrigeration & Air Conditioning (HVACR) Knowledge of Basic Electricity & Electronics and the fundamentals of refrigeration technology are prerequisite for the Commercial Refrigeration & Air Conditioning Program. The majority of students who enroll in the Major Appliances Program and Domestic Refrigeration & Air Conditioning Programs where they learn basic electricity and basic refrigeration, generally also enroll for this program. Students learn to work on central air conditioning systems, heat pumps, roof top A/C systems, walk-in and reach-in refrigerators and freezers, ice machines and other commercial refrigeration equipment. HVACR training includes 100 hours of Massachusetts Refrigeration Code and 100 hours of Mass. Electrical code, each counting toward the qualifications for a refrigeration license in Massachusetts. For almost 30 years, Bay State’s “Hands-On” training has worked for thousands of students. Half of the students’ time in school is in the classroom learning the theory, and the other half is spent in the workshops gaining “Hands-On” experience. New students receive a laptop computer and training on how to use it as a learning tool. The cost of the laptop is included in the tuition and the student will own it at the end of his program. In addition, all students will receive preparation and training to take an R410A Certification test, offered by the school. Graduates of the Commercial Refrigeration & Air Conditioning Program are prepared to enter the work force as entry level technicians. Many of our graduates are hired by commercial refrigeration and air conditioning companies to install, service and... [-]

Major Appliances / Basic Electricity Course

Bay State School Of Technology
Campus September 2017 USA Canton

Every household, every business, and just about every building in the world has some major appliances in use. Clothes Washers, Dish Washers, Clothes Dryers, Refrigerators, Microwave Ovens, Stoves and disposals are some of the more common ones. [+]

Best Part time Course Studies in Electrical Installation 2017. Major Appliances / Basic Electricity Course Every household, every business, and just about every building in the world has some major appliances in use. Clothes Washers, Dish Washers, Clothes Dryers, Refrigerators, Microwave Ovens, Stoves and disposals are some of the more common ones. They break down occasionally and need to be repaired. Is there anyone you know who doesn’t own some kind of Major Appliance? Major Appliance technicians need to have the skills necessary to successfully service these machines, such as learning to diagnose and troubleshoot. Students enrolled in The Major Appliance Program at Bay State are learning these skills by working on the actual pieces of equipment in the lab workshops. For almost 30 years, Bay State’s “Hands-On” training has worked for thousands of students. Half of the students’ time in school is in the classroom learning the theory of how the appliances work and the other half is spent in the workshops gaining hands on experience. An important component of the course is the training on Electricity and Electronics. The ability to understand how electricity works, and the skills needed to read a wiring diagram or schematic is an essential part of the diagnostic process. In addition, each student receives up-to-date training on the electronic controls that manage each and every Major Appliance. New students receive a laptop computer and training on how to use it as a learning tool. The cost of the laptop is included in the... [-]