Part time Course in Aerospace in North America

Compare Part time Course Studies in Aerospace in North America 2017

Aerospace

There are hundreds of nationally recognized Professional qualifications & training courses from the worlds leading education providers. Course objectives should lead to teaching methods and student interest.

Aerospace engineering deals with developing and designing machines made to fly. Programs can teach about technologies and how multiple varieties of aircraft and spacecraft are properly designed, built and tested.

The United States of America commonly called the United States, is a federal republic consisting of fifty states and a federal district. The 48 contiguous states and the federal district of Washington, D.C. are in first North America between Canada and Mexico. The state of Alaska is in northwestern North America, west of Canada and east of Russia across the Bering Strait, and the state of Hawaii is an archipelago in the mid-North Pacific. The country also has five populated and nine unpopulated territories in the Pacific and the Caribbean.

Contact Universities Best Part time Course Studies in Aerospace in North America 2017

Read More

FAA Zero to Commercial Pilot License

Flying Academy, International Flight Training Center
Online & Campus Combined Part time 12 months Open Enrollment USA Miami

Today, more than ever, the airline industry needs highly trained and skilled professionals for the growing industry to safely fly over 5 bn. passengers annually to their destinations. Being a Commercial Pilot comes also with a lot of responsibility, complex decision making and the ability to understand and cope with abnormal situations. [+]

Top Part time Course Studies in Aerospace in North America. Today, more than ever, the airline industry needs highly trained and skilled professionals for the growing industry to safely fly over 5 bn. passengers annually to their destinations. Being a Commercial Pilot comes also with a lot of responsibility, complex decision making and the ability to understand and cope with abnormal situations. This program is designed for students with little to no flying experience and that want to pursue a career in aviation according to FAA regulations. The trainees of the program will start with PPL(A) and, upon obtaining the necessary flight experience, will continue with IR(A), CPL(A) modules or MEP (multi-engine aircraft) flight programs. After successful completion of the zero to CPL(A) course, you will be issued an FAA CPL(A) license and will be authorized to act as Pilot-In-Command (PIC) and acquire compensation on an aircraft. Course entry requirements Minimum age of 18 years (16 years to enroll PPL training program) Second class medical certificate No previous flight experience needed English language knowledge Privileges The privileges of the holder of an CPL(A) are to act as pilot-in-command (Captain) or co-pilot (First Officer) in charter operations and corporate flying which exercises all the privileges of the holder of a PPL(A), and IR(A). At the end of the course, each pilot will have 190 hours of flight experience out of which 100 as Pilot in Command [PiC] if training is done under FAA Part 141; 250 hours of flight experience out of which 100 as Pilot in Command [PIC] if training is done under FAA Part 61. Learning objectives Ground Training – during the Zero to CPL course, the trainee will complete theoretical courses for PPL(A), IR(A), MEP(A) and CPL(A) Flight training – the flight training will start with the PPL(A), continues with IR(A) and with the CPL SE/ME (A). Ground Training The applicant has to go through ground training covering: Air law and ATC procedures Airframes & systems, electrics, power plant, emergency equipment Instrumentation Mass and balance Performance Flight planning & monitoring Human performance & limitations Meteorology General navigation Radio navigation Operational procedures Principles of flight Communications Flight Training At the end of the training, the trainee must have a minimum of 190 total flight hours under FAA Part 141 (including PPL(A) time): 100 hours as pilot-in-command 20 hours of VFR cross-country flight time as pilot-in-command, including a cross-country flight totaling at least 350 NM in the course of with full-stop landings at two aerodromes different from the aerodromes of departure 35 hours of instrument training 10 hours on a complex airplane At the end of the training, the trainee must have a minimum of 250 total flight hours under FAA Part 61 (including PPL(A) time): 100 hours as pilot-in-command 50 hours of VFR cross-country flight time as pilot-in-command, including a cross-country flight totaling at least 350 NM in the course of with full-stop landings at two aerodromes different from the aerodromes of departure 40 hours of instrument training 10 hours on a complex airplane Examination - Written Test The applicant has to demonstrate the theoretical knowledge at an FAA approved testing center in the form of a written test. The test consists of nine subjects (Meteorology, Navigation, Instrumentation, Communications, Aircraft General Knowledge, Principles of flight, Air Law, Flight performance and planning, Human Performance and limitations, Operational procedures, etc). The applicant must pass the written exam witha minimum of 70% which is still a passing score. One must complete and successfully pass the written exam prior to taking the theoretical/practical examination. Examination – Theoretical An applicant must demonstrate a level of knowledge appropriate to the privileges of the holder of a PPL(A), IR(A), and CPL(A) in accordance with the requirements under the FARs. Examination – Practical The practical skill exams in the airplane with the examiner can be taken after successful completion of the written tests [PPL(A) & CPL(A)]. The applicant must demonstrate the ability to: Operate the airplane within its limitations Complete all maneuvers as smooth and as accurate as requested by FAA Exercise good judgment and airmanship Apply aeronautical knowledge Maintain control of the airplane at all times. The FAA 0-CPL(A) program fee covers the following items and services: Flight Instructor time for ground & practical training Airplane usage, including fuel. Free of charge iPad mini 4G + WiFi Bonus - account for Rocket Route flight planning services - valued $300/year *All training fees are bound to the actual exchange rates of the local currency of the Flying Academy base where the training or a part of the training is provided. Duration From 0 to Commercial the minimum time needed is approximately 6 months, however, depending on the trainee’s availability this can be tailor made. International students Flying Academy is able to provide the needed documentation for non US citizens to be able to enrol in flight training courses in the USA. [-]

FAA FLIGHT TRAINING FOR CPL - COMMERCIAL PILOT LICENSE

Flying Academy, International Flight Training Center
Campus 2 months September 2017 Czech Republic Prague Brno USA South Miami Heights + 2 more

The Commercial Pilot Certificate is a qualification that permits the holder to act as a pilot of an aircraft for remuneration. [+]

The Commercial Pilot Certificate is a qualification that permits the holder to act as a pilot of an aircraft for remuneration. Course entry requirements: Minimum age of 18 years Second class medical certificate At least PPL(A) (Private Pilot License) holder with 250 hours total flight time out of which 100 as Pilot in Command. English language skills Privileges: Exercise all the privileges of the holder of a PPL(A); Act as co-pilot (First Officer) in commercial air transportation Act as pilot-in-command or co-pilot of any airplane (CPL(A)) engaged in operations other than commercial air transportation. Act as pilot-in-command in commercial air transportation of any single-pilot airplane Ground training: The trainee will cover during the ground training the following courses: Air law and ATC procedures Airframes & systems, electrics, power plant, emergency equipment Instrumentation Mass and balance Performance Flight planning & monitoring Human performance & limitations Meteorology General navigation Radio navigation Operational procedures Principles of flight Communications Flight training: At the end of the training, the trainee must have a minimum of 250 total flight hours (including PPL(A) and IR time) if acquiring an FAA CPL Part 61 certification or must have minimum of 190 total flight hours (including PPL(A) and IR time if acquiring an FAA CPL Part 141 certification: FAA Part 141 100 hours as pilot-in-command 50 hours of VFR cross-country flight time as pilot-in-command, including a cross-country flight totaling at least 350 NM in the course of with full-stop landings at two airports different from the airport of departure 10 hours of instrument training 5 hours of night flying - 5 solo take-offs and 5 landings 10 hours on a complex airplane Examination - Written Test The applicant has to demonstrate the theoretical knowledge at an FAA approved testing center in the form of a written test. The test consists of nine subjects (Meteorology, Navigation, Instrumentation, Communications, Aircraft General Knowledge, Principles of flight, Air Law, Flight performance and planning, Human Performance and limitations, Operational procedures, etc). The applicant must pass the written exam with a minimum of 70% which is still a passing score. One must complete and successfully pass the written exam prior to the taking the theoretical/practical examination. Examination – Theoretical An applicant must demonstrate a level of knowledge appropriate to the privileges of the holder of a CPL(A) in accordance with the requirements under the FARs. Examination – Practical The practical skill exam in the airplane with the examiner can be taken after successful completion of the written tests. The applicant must demonstrate the ability to: Operate the airplane within its limitations Complete all maneuvers as smooth and as accurate as requested by FAA Exercise good judgment and airmanship Apply aeronautical knowledge Maintain control of the airplane at all times. Upgrades We offer the opportunity to upgrade for different aircraft during the CPL course. Below you can find training fee difference that will be charged on a top of standard offer. Plane upgrades - additional cost for the training Amount Upgrade fee USD/hr Additional cost for the training USD Aircraft Piper Cadet (VFR) 35 4 140 Aircraft Piper Warrior (IFR, Ads-B & Garmin G530W - 4 seater) 35 20 700 Aircraft Cessna 172R (IFR, KLN94, 4 seater) 35 20 700 Aircraft Cessna 172SP Garmin 1000 (IFR, Glass cockpit, 4 seater) 35 54 1890 Aircraft Piper Arrow (IFR, Garmin G430, 4 seater) 35 46 1610 Duration The CPL(A) can be obtained in a range period starting from two months depending on the trainees time availability for both theoretical and practical training. International students Flying Academy is able to provide the needed documentation for non US citizens to be able to enrol in flight training courses in the USA. [-]

EASA 0-ATPL WITH US EXPERIENCE

Flying Academy, International Flight Training Center
Campus 63 weeks September 2017 USA South Miami Heights Czech Republic Prague Brno + 2 more

The course “0-ATPL with US experience” guides the students through the process of getting their Private Pilot License in the US all the way to the ATPL level. This includes the frozen ATPL(A) written exam as well the required practical exams for the Instrument Rating as well as the CPL+MEP. [+]

Top Part time Course Studies in Aerospace in North America. The course “0-ATPL with US experience” guides the students through the process of getting their Private Pilot License in the US all the way to the ATPL level. This includes the frozen ATPL(A) written exam as well the required practical exams for the Instrument Rating as well as the CPL+MEP. ATPL is the highest level of aircraft pilot certification. ATPL course is meant for future airline pilots. ATPL certified pilots are authorized to act as Pilot-in-Command of an aircraft in any airline. Privileges The privileges of the holder of an ATPL(A) are to act as Pilot-In-Command (Captain) or co-pilot (First Officer) in airplanes engaged in commercial air transportation exercise all the privileges of the holder of a PPL(A), a CPL(A) and IR(A). Learning objectives Ground Training – during the course “Zero to ATPL with US experience”, the trainee will complete theoretical courses for PPL(A), IR(A), MEP(A) and ATPL 650(A) Flight training – the flight training will start with the PPL(A) including the NIGHT in the USA, continues with IR(A) and MEP(A) in Europe, and finalizes with the CPL(A). Flight Training At the end of the training, the trainee must have a minimum of 100 total flight hours (including PPL(A) time collected in the USA): 100 hours as pilot-in-command 20 hours of VFR cross-country flight time as pilot-in-command, including a cross-country flight totaling at least 540 km (300 NM) in the course of with full-stop landings at two aerodromes different from the aerodromes of departure 50 hours of instrument training 5 hours of night flying including one cross-country flight and 5 solo take-offs and 5 landings 5 hours on a complex airplane ATPL(A) Ground training The applicant has to go through ground training covering: Air law and ATC procedures Airframes & systems, electrics, powerplant, emergency equipment Instrumentation Mass and balance Performance Flight planning & monitoring Human performance & limitations Meteorology General navigation Radio navigation Operational procedures Principles of flight Communications (VFR+IFR) For ATPL(A) - An applicant must demonstrate a level of knowledge appropriate to the privileges of the holder of a ATPL(A) in accordance with EASA requirements in Part-FCL. Examination – Practical The practical skill exams in the airplane with the examiner can be taken after successful completion of the written tests [PPL(A) & ATPL(A)]. The applicant must demonstrate the ability to: Operate the airplane within its limitations Complete all maneuvers as smooth and as accurate as requested by local authority Exercise good judgment and airmanship Apply aeronautical knowledge Maintain control of the airplane at all times. Duration From 0 to ATPL the minimum time needed is about 63 weeks, however, depending on the trainee’s availability this can be tailor made. Training fees are covering the following items and services: Instructor time for ground school & practical training Plane rental, including fuel *All training fees are bound to the actual exchange rates of the local currency of the Flying Academy base where the training or a part of the training is provided. [-]

EASA COMMERCIAL PILOT FROM 0 TO ATPL

Flying Academy, International Flight Training Center
Campus 63 weeks September 2017 Czech Republic Prague Brno USA South Miami Heights + 2 more

Today, more than ever, the airline industry needs highly trained and skilled professionals for the growing industry to safely fly over 5 bn. passengers annually to their destinations. [+]

Today, more than ever, the airline industry needs highly trained and skilled professionals for the growing industry to safely fly over 5 bn. passengers annually to their destinations. Being a Commercial Pilot comes also with a lot of responsibility, complex decision making and the ability to understand and cope with abnormal situations. This program is designed for students with little to no flying experience and that want to pursue a career in aviation according to EASA regulations. Flying Academy is highly specialized in offering training from ab-initio to “frozen” ATPL(A). The trainees of the program will start with PPL(A) and, upon obtaining the necessary flight experience, will continue with IR(A), CPL(A) modules or MEP (multi-engine aircraft) flight programs. After successful completion of the zero to ATPL(A) course, you will be issued an EASA CPL(A) license with ATPL(A) theory completed and will be authorized to act as Pilot-In-Command (PIC) of an aircraft in an airline. The ATPL(A) license is the highest level of aircraft pilot certification. Course entry requirements Minimum age of 18 years (16 years to enroll PPL training program) First class medical certificate (Second class medical certificate untill finishing MEP) No previous flight experience needed Sufficient level of knowledge of Mathematics and Physics English language knowledge - FTO oral and written test Privileges The privileges of the holder of an ATPL(A) are to act as pilot-in-command (Captain) or co-pilot (First Officer) in airplanes engaged in commercial air transportation exercise all the privileges of the holder of a PPL(A), a CPL(A) and IR(A). Learning objectives Ground Training – during the zero to ATPL course, the trainee will complete theoretical courses for PPL(A), IR(A), MEP(A) and ATPL 650(A) Flight training – the flight training will start with the PPL(A) followed by Night Rating, continues with IR(A) and MEP(A), and finalizes with the CPL(A). Ground Training The applicant has to go through ground training covering: Air law and ATC procedures Airframes & systems, electrics, power plant, emergency equipment Instrumentation Mass and balance Performance Flight planning & monitoring Human performance & limitations Meteorology General navigation Radio navigation Operational procedures Principles of flight Communications Flight Training At the end of the training, the trainee must have a minimum of 200 total flight hours (including PPL(A) time): 100 hours as pilot-in-command 20 hours (minimum) of VFR cross-country flight time as pilot-in-command, including a cross-country flight totaling at least 540 km (300 NM) in the course of with full-stop landings at two aerodromes different from the aerodromes of departure 50 hours of instrument training 5 hours of night flying including one cross-country flight and 5 solo take-offs and 5 landings 11 hours on Multi Engine aircraft 5 hours on a complex airplane Examination - Theoretical For PPL(A) - The applicant has to demonstrate the theoretical knowledge at the CAA office in the form of written tests. Tests consist of nine subjects (Meteorology, Navigation, Communications, Aircraft General Knowledge, Principles of flight, Air Law, Flight performance and planning, Human Performance and limitations, Operational procedures). For ATPL(A) - An applicant must demonstrate a level of knowledge appropriate to the privileges of the holder of ATPL(A) in accordance with EASA requirements in Part-FCL. Examination – Practical The practical skill exams in the airplane with the examiner can be taken after successful completion of the written tests [PPL(A) & ATPL(A)]. The applicant must demonstrate the ability to: Operate the airplane within its limitations Complete all maneuvers as smooth and as accurate as requested by EASA Exercise good judgment and airmanship Apply aeronautical knowledge Maintain control of the airplane at all times. Training fees are covering the following items and services: All training manuals Access to the Learning Management System and EASA question bank Instructor time for ground school & practical training Planes, including fuel *All training fees are bound to the actual exchange rates of the local currency of the Flying Academy base where the training or a part of the training is provided. [-]

FAA From 0 to 1.500 hours flight training with employment opportunity.

Flying Academy, International Flight Training Center
Campus 14 months Open Enrollment USA Miami

Preparing new pilots for the airlines is Flying Academy's area of expertise. It takes a great level of dedication and passion for flying to be able to share an impressive amount of knowledge in a short time and in addition, to develop the skills of the pilot to be able to cope with any situation which might arise during his or her career. [+]

Top Part time Course Studies in Aerospace in North America. From Zero to 1.500 hours This program is addressed EXCLUSIVELY to US work permit holders. If you do not have a US work permit, please check our extensive course offer for international students.This course is designed for future pilots with no current flight experience, who will start the training from PPL(A) to CPL(A) and add the IR(A), MEP and Flight Instructor ratings and additionally 1300 hours of experience within 2 years of working as a Flight Instructor (Pilot in Command time) at Flying Academy, reaching 1500 hours total time, that is not only a crucial milestone for all airlines, but also a turning point for each pilot’s personal flight experience. Course entry requirements Minimum age of 18 years First class medical certificate Ownership of work permission for EU and/or USA No flight experience Sufficient level of knowledge of Mathematics and Physics English language knowledge - ATO oral and written test Good communication skills and ability to teach others United States citizenship or working permit for US Conflict-free person, with positive attitude for work Training results corresponding to the future employment License privileges & Flight Instructor in Flying Academy Take advantage and go for a unique offer in United States - start your training for a professional pilot and get your first employment straight upon completion of your training! From Zero to 1.500 hours course offers you the best opportunity to start your professional pilot career with 1500 flight hours in your logbook: 200 hours during the zero to Commercial Pilot training program (100 hours as Pilot in Command and 100 hours as Dual received) 1.300 hours during the first 2 years of working as a Flight Instructor in Flying Academy (Pilot in Command time) Please note that a Flight Instructor position in Flying Academy is not guaranteed and is 100% dependent on the trainee's performance during the training period but also about how he/she will develop teaching skills. Periodic assessment on the pilot's performance is done during the entire training period, making sure that all necessary steps and actions have been performed for the trainee to be able to become a Flight Instructor for Flying Academy. Please note that for this course you need to be owner of work permit for EU and/or USA. Duration The minimum time needed for completion of Zero to 1.500 hours training program is about 16 months after which additional 24 months of contract from the moment of obtaining the Flight Instructor license. Learning objectives Ground Training – during the Zero to 1.500 hours, the trainee will complete theoretical courses for PPL(A), IR(A), MEP(A), CPL (for FAA training applicants) & CFI(A). Flight training – the flight training will start with the PPL(A) and Night Rating (for EASA applicants), continues with IR(A), MEP(A), CPL(A) and finally CFI(A). Ground Training The applicant has to go through ground training covering: Air law and ATC procedures Airframes & systems, electrics, power-plant, emergency equipment Instrumentation Mass and balance Performance Flight planning & monitoring Human performance & limitations Meteorology General navigation Radio navigation Operational procedures Principles of flight Communications For the FI rating, the trainee will undergo dedicated preparation to meet the standards of quality of Flying Academy for Certified Flight Instructors. Flight Training At the end of the training + 2 years of employment, the trainee will have a minimum of 1500 total flight hours (including PPL(A) time): 1.400 hours as Pilot in Command 100 hours of Dual hours (training received) Examination - Theoretical The applicant has to demonstrate the theoretical knowledge at the FAA approved office in the form of written tests. For ATPL(A) - An applicant must demonstrate a level of knowledge appropriate to the privileges of the holder of ATPL(A) in accordance with EASA requirements of Part-FCL. Examination – Practical The practical skill exams in the airplane with the examiner can be taken after successful completion of the written tests. For the 0-1500 hours there are 6 practical examinations: PPL(A), IR(A), MEP(A) & MEP(A) IR, CPL(A) and CFI(A) The applicant must demonstrate the ability to: The applicant must demonstrate the ability to: Operate the airplane within its limitations Complete all maneuvers as smooth and as accurate as requested by FAA Exercise good judgment and airmanship Apply aeronautical knowledge Maintain control of the airplane at all times. Training fees are covering the following items and services: All training manuals Access to the Learning Management System and EASA question bank Instructor time for ground school & practical training Plane rental, including fuel *All training fees are bound to the actual exchange rates of the local currency of the Flying Academy base where the training or a part of the training is provided. [-]

Aviation Technician - Aircraft Maintenance

Confederation College
Campus 2 years September 2017 Canada Thunder Bay

The School of Aviation at Confederation College has a well-established Aviation Technician - Aircraft Maintenance program designed and developed in consultation with Industry and Transport Canada [+]

Aviation Technician - Aircraft Maintenance The School of Aviation at Confederation College has a well-established Aviation Technician - Aircraft Maintenance program designed and developed in consultation with Industry and Transport Canada. This program will provide you with the advanced knowledge and skills necessary to develop into a competent and reliable Aircraft Maintenance Engineer. Aircraft Maintenance is a well-established area of aviation technology with continuing requirements for entry level personnel. High on the priority list are Aircraft Maintenance Engineers as Industry Canada predicts a shortage of qualified aviation personnel in the near future. Future graduation levels must rise to meet future industry employment demands. The program is two years in duration and combines a mixture of theory and practical application. Airframe, engine and electrical courses are taught concurrently; approximately 50% of the time is devoted to practical and 50% to theory. Accreditation: The program is accredited by Transport Canada. Graduates having an attendance record greater than 95% are given 18 months credit, determined by Transport Canada, towards the experience requirements for an Aircraft Maintenance Engineer’s Category "M" license. [-]

Aerospace Manufacturing Engineering Technology

Confederation College
Campus 2 - 3 years September 2017 Canada Thunder Bay

As an Aerospace Technologist you will work alongside Engineers and shop floor personnel, managing projects while resolving manufacturing problems as they arise. [+]

Top Part time Course Studies in Aerospace in North America. Aerospace Manufacturing Engineering Technology If you’re a motivated, enthusiastic individual, eager to pursue an extremely rewarding career with a difference, then look no further. Canada’s aerospace industry provides numerous opportunities to work in a fast-paced, productive team environment. The design and manufacture of aerospace products requires the skills and input of many talented workers. As an Aerospace Technologist you will work alongside Engineers and shop floor personnel, managing projects while resolving manufacturing problems as they arise. Through Confederation College, you now have the option of graduating from the 2-year Aerospace Manufacturing Engineering Technician program with a Technician Diploma or from the Aerospace Manufacturing Engineering Technology with an Advanced Diploma after completing three years of study. [-]