Course in Aeronautical Engineering in Athens in Greece

View all Course Studies in Aeronautical Engineering 2017 in Athens in Greece

Aeronautical Engineering

You can usually take higher education courses if you’re 18 or older. They’re regularly taught in universities, colleges and professional institutions such as art schools or agricultural colleges - nearly all of which have their own websites. You can get a wide range of skills, for example, diplomas, bachelor degrees, foundation degrees and post-graduate degrees.

Greece developed their education system with higher education at the top. Over 40% of all Greeks live in Athens and there is also where the best opportunities to pursue an higher education level is. Bordered by Albania, Macedonia, Bulgaria and Turkey, Greece is a tourist pearl with one of the world's fantastic beaches.

Athens is renowned for being one of the oldest cities in the world and Greece. It is the largest in regards to population and size making it the country’s capital and hosts numerous higher learning institutions and universities.

Request Information Course Studies in Aeronautical Engineering in Athens in Greece 2017

Read More

EASA Part 66 Type Ratings Courses - (Boeing 737NG/Boeing 737CL/AS332) B1/B2/C

Aviatec Training Center
Campus Full time 39 days August 2017 Greece Athens

This course is in compliance with EASA Part-66. The participant will acquire knowledge necessary to perform and certify maintenance tasks permitted to be carried out as certifying staff category B1/B2. [+]

Course Studies in Aeronautical Engineering in Athens in Greece. BOEING 737-600/700/800/900 (CFM 56) EASA PART-66 B1/B2 THEORETICAL Course Outline This course is in compliance with EASA Part-66. The participant will acquire knowledge necessary to perform and certify maintenance tasks permitted to be carried out as certifying staff category B1/B2. It provides detailed description, operation, component location, removal/installation, bite and troubleshooting procedures to a maintenance manual level. Course Duration: 174h, 29 days Target Group: EASA Part-66 category B1/B2 or other maintenance staff. Number of Participants: Recommended 15 BOEING 737-600/700/800/900 (CFM 56) EASA PART-66 B1/B2 PRACTICAL Course Outline This course is in compliance with EASA Part-66. The participant will acquire practical experience necessary to perform and certify maintenance tasks permitted to be carried out as certifying staff category B1/B2. It provides detailed systems operation presentation, component location, removal/installation, bite and troubleshooting procedures on an actual aircraft in cooperation with our partner EgyptAir. Course Duration: 10 days Target Group: EASA Part-66 category B1/B2 or other maintenance staff. Number of Participants: Recommended 15 Examination Phase examination, closed book, multiple-choice examination type. Pass mark per module examination is 75%. Practical assessment for the practical training. Eurocopter AS332 (Turbomeca Makila 1A/1A1) B1/B2 THEORETICAL Course Outline This course is in compliance with EASA Part-66. The participant will acquire knowledge necessary to perform and certify maintenance tasks permitted to be carried out as certifying staff category B1/B2. It provides detailed description, operation, component location, removal/installation, adjustments and troubleshooting procedures to a maintenance manual level. Course Duration: 153h, 26 days Target Group: EASA Part-66 category B1/B2 or other maintenance staff. Number of Participants: Recommended 10 Eurocopter AS332 (Turbomeca Makila 1A/1A1) B1/B2 PRACTICAL Course Outline This course is in compliance with EASA Part-66. The participant will acquire practical experience necessary to perform and certify maintenance tasks permitted to be carried out as certifying staff category B1/B2. It provides detailed systems operation presentation, component location, removal/installation, adjustments and troubleshooting procedures on an actual aircraft. Course Duration: 10 days Target Group: EASA Part-66 category B1/B2 or other maintenance staff. Number of Participants: Recommended 10 Examination Phase examination, closed book, multiple-choice examination type. Pass mark per module examination is 75%. Practical assessment for the practical training. [-]

EASA Part66 Basic Licence Course

Aviatec Training Center
Campus Full time 2 years September 2017 Greece Athens

Being a Licensed Mechanic is a highly skilled and responsible job, and it takes two years of theoretical studies and two more years of practical experience in a maintenance organisation, in order to be eligible for obtaining the licence. Even this is just the beginning for most Licensed Mechanics, who does more study, gains more experience toward specialising in aircraft types and therefore is most likely to work at such a position. [+]

For a successful licensed mechanic PART 66 BASIC TRAINING Being a Licensed Mechanic is a highly skilled and responsible job, and it takes two years of theoretical studies and two more years of practical experience in a maintenance organisation, in order to be eligible for obtaining the licence. Even this is just the beginning for most Licensed Mechanics, who does more study, gains more experience toward specialising in aircraft types and therefore is most likely to work at such a position. Training courses can start any time, but candidates cannot apply for a license until the age of 18. Training includes both theoretical and practical parts, followed by examinations and practical assessments. The candidates must be able to read, write and communicate to an understandable level in English language in which almost all the technical documentation and procedures necessary to support the issue of the certificate of release to service are written. Categories of Aircraft Mechanics Licensed Aircraft Mechanics are divided into the following main categories according to European Aviation Legislation: Category A. A category A aircraft maintenance license permits the holder to issue certificates of release to service following minor scheduled line maintenance and simple defect rectification tasks. Category B1. A category B1 aircraft maintenance license permits the holder to issue certificates of release to service following any scheduled and unscheduled maintenance (line, base, modifications) and defect rectification tasks performed on aircraft structure, power plant, mechanical, electrical, limited on avionic systems. This license applies for airplane turbine, airplane piston, helicopter turbine and helicopter piston. The category B1 License includes the corresponding A category. Category B2. This is when the candidate decides to follow and attend the course which will provide him/her with technical knowledge in avionics skills. A category B2 maintenance license permits the holder to issue certificates of release to service following any scheduled and unscheduled maintenance (line, base, modifications) and defect rectification tasks performed on aircraft avionics systems. The category B2 License does not include the corresponding A category. Category B3. Is applicable to piston-engine non-pressurized airplanes of 2000 Kg MTOM and below. Category C. This is when the candidate decides to follow and attend the relevant course which will provide him/her with technical knowledge sufficient to release aircrafts to service after Base Maintenance. The main courses provided by Aviatec are EASA Part-66 Cat A, B1 and C for turbine powered engine airplanes as complete module courses including Practical Training in real maintenance environment and at our own workshops. THE COURSE The training subjects that a candidate has to attend at Aviatec in order to become a Licensed Aircraft Mechanic are divided into the following modules according to the European Aviation Legislation requirements: Module 1. Mathematics Module 2. Physics Module 3. Electrical Fundamentals Module 4. Electronic Fundamentals Module 5. Digital Techniques in Electronic Instrument Systems Module 6. Materials and Hardware Module 7. Maintenance Practices Module 8. Basic Aerodynamics Module 9. Human Factors Module 10. Aviation Legislation Module 11A. Turbine Airplane Aerodynamics, Structures and Systems (for B1.1 only) Module 12. Helicopter Aerodynamics, Structures and Systems Module 13. Aircraft Aerodynamics, Structures and Systems (for B2 only) Module 14 Propulsion (for B2 only) Module 15. Gas Turbine Engine (for B1.1 only) Module 17. Propeller (for B1.1 only) Modules are taught in different levels of knowledge depending on whether the candidate is wishing to follow an A, B1, B2 or C category career. Upon completion of each module, the candidate has to take an exam in which if successfully passed he/she will be credited accordingly. The exams have a certain standard of pass grade and each module exam consists of different kind of tests like multi choice questions, essays, practical tests e.t.c. BASIC PRACTICAL TRAINING WORKSHOPS Aviatec has established practical workshops in order to comply with the practical training requirements. The workshops are equipped with machine and sheet metal shop equipment, actual aircraft parts, a real aircraft, a complete turbine engine, test and calibration units and generally anything that will support customer training needs and students’ practical skill built up. Practical training will also be conducted on actual aircrafts. FURTHER PRACTICAL TRAINING Aviatec is working closely with maintenance organisations and technological institutions, so we are able to provide the complete one stop practical training shop to meet all EASA legislated training requirements and thus supporting customer’s training needs and students’ practical skill built up. [-]